HiPRO-PLA 1,75mm/2,85mm330gr spool

29,00

READY FROM THE PRINT: HIGH TEMPERATURE AND IMPACT RESISTANCE PLA, REACHING ABS LEVELS. AVOID ANNEALING AND ITS DEFORMATIONS

330gr spool

Limpiar

Descripción

PRODUCT

READY FROM THE PRINT: HIGH TEMPERATURE AND IMPACT RESISTANCE PLA, REACHING ABS LEVELS. AVOID ANNEALING AND ITS DEFORMATIONS

Improved mechanical and thermal properties PLA, ready from the print. When printed with a hot bed at 100ºC a crystallization process starts into the material converting the filament result into an improved properties PLA.

This product enables its users to avoid annealing and deformations derived from it, like in other commercially available “high-properties” PLAs. 330g spool. White pearl color.

PRINTING CONDITIONS
•Print Temperature: General PLA Temperatures (200-215ºC)
•Print Speed: 50mm/s. Higher speed could be used depending on the printed geometry.
•Retraction Speed: 35mm/s.
•Retraction Length: 4,5mm.
•Bed Temperature: 100ºC enables crystallized prints // 60ºC bed permits you to get general PLA with optimum print quality too.
•Maximum Angle without support: 45º.
•Zero warping. Adhesion is perfect with common lacquer.

APPLICATION RECOMMENDATIONS
•High Impact and Temperature Resistance requirement PLA applications.
•Avoid annealing or curing into oven: High Properties PLA ready from the printer.
•Ease of print.
•Smooth touch and silky appearance.
•Normal PLA behavior could be reached just printing at 60ºC bed
temperature.

Información adicional

Peso 1.2 kg
Dimensiones 200 × 200 × 60 cm
Diametro

1,75mm, 2,85mm

Valoraciones

No hay valoraciones aún.

Solo los usuarios registrados que hayan comprado este producto pueden hacer una valoración.